Adams Series Workbench Electric Hydraulic Lift with Formica™ Laminate Top and Round Front Edge 16 Stroke

• Meet ANSI, BIFMA, DIN and GSA Structural Standards.
• 1,000 Lbs. Capacity
• Assembles in Less.
• Pass ESD Association Standards.
• 1.125" Thick Top.
• Adjustment Range 16". 30" to 46" or Custom.
• 16-gauge Strong Cold Rolled Steel.
• Available 12 Standard Sizes or Custom.

! Although our laminated tops and shelves are very water resistant, they are not recommended for use where running water is present or where constant water spills are possible. These type of wet applications require either stainless steel or resin top tables.

MAINTENANCE: Always clean ESD bench tops with good ammoniated detergent, rinsing with clear water. Do not use wax or anything that can leave a coating on the laminate since these may adversely affect or modify its electrical properties

All BenchPro™ ESD benches are only available with ergonomic contoured front edges. This way, the ESD laminate conducts the static charges all the way to the steel frame. The steel frame has two wrist strap jacks mounted on the top of the two front legs for convenience. BenchPro™ also provides two grounding wires to take the static from the frame to either an adjoining bench or to ground.

! To guarantee a static clear work area, all BenchPro™ ESD bench top have their edges laminated with the same static control laminates as used on the top, while the underside of the tops have a laminated solid aluminum sheet.